Type-C Conversion Adapter DC 5.5x2.5mm (20V) 100W Compatible

・Supports up to 20V (19.5V).
・Can be used with laptops and other devices by using a separate 20V compatible PD charger and cable.
・Output voltage (19.5V) is engraved.

DC Plug: 5.5x2.5mm (20V) L-shaped. Compatible with Fujitsu/Toshiba/Lenovo/acer/ASUS, etc. The L-shaped plug allows insertion in a direction that is less likely to interfere with mouse operation or the device. All output voltages and Type-C connections have been checked.
Can be used with DC 18V-20V laptops when used in conjunction with a 20V output compatible PD charger & Type-C (3A-5A) cable.
If you have a car charger compatible with a cigarette lighter socket and PD charging, you can charge your PC in the car. (Note: Few cigarette chargers support 20V output. Some products are only compatible with 24V vehicles and not with 12V vehicles. Please be careful.)
Even with a Type-C port, a PD charger that cannot output 20V cannot be used. (e.g., smartphone chargers, Type-C ports on cars or PCs)
Pay attention to the output of the PD charger and the cable (at least 45W). The output must be higher than the PC's AC adapter. If the wattage is too low, it will not charge. (If the PC's AC adapter is 19V x 3A (57W), then use a PD charger with 20V 3A (60W) or higher.)

Most reasons for not being able to use it are:
　① Using a charger that cannot output 20V or is not PD compatible.
　② Insufficient wattage (output) from the charger.
　③ Cable is not compatible with 45W or 100W (2.5A or higher for 45W, 5A or higher for 100W).
　④ Compatibility issues between the PD charger and the device being used.
It cannot be used unless all conditions for the charger and cable are met.

Will be delivered in simple packaging.